Fluke 6270A Pressure Controller Calibrator

Fluke 6270A Pressure Controller Calibrator

The 6270A features pressure ranges from low differential pressure to 20 MPa (3000 psi), which covers the requirements of most gauges and sensors. Two levels of accuracy, 0.02 % FS or 0.01 % reading, let you balance your need for accuracy with the limits of your budget.

Thanks to its modular design, the 6270A is flexible enough that you can install modules with different accuracy classes within the same chassis. You can buy the highest level of accuracy for the pressure ranges that require it and a lower, more economical level of accuracy where applicable.

The 6270A’s accuracy specifications are provided in full and supported by a Technical Note that details its measurement uncertainty, so you know exactly what you are getting. As with all Fluke Calibration instruments, these specifications are conservative, complete, and dependable.

Also Read  6270A Modular Pressure Controller 

Fluke MDA-510 and MDA-550 Motor Drive

Fluke MDA-510 and MDA-550 Motor Drive

Simplify complex motor-drive troubleshooting with guided test setups and automated drive measurements that provide reliable, repeatable test results.

The Fluke MDA 510 and MDA 550 Motor-Drive Analyzers save time and eliminate the hassle of setting up complex measurements, while simplifying the troubleshooting process for variable frequency drives. Simply select a test and the step-by-step guided measurements show you where to make voltage and current connections, while the preset measurement profiles ensure you will capture all the data you need for each critical motor-drive section—from the input to the output, the DC bus, and the motor itself. From basic to advanced measurements, the MDA-500 Series has you covered, and with a built-in report generator you can quickly and easily generate as-found, and as-left reports with confidence.

• The MDA-510 and MDA-550 are the ideal portable motor-drive analysis test tools and can help safely locate and troubleshoot typical problems on inverter type motor-drive systems.

• Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance and harmonics (MDA-550), voltage modulation, and motor shaft voltage discharges (MDA-550)

• Perform extended harmonics measurements to identify the effects of low and high order harmonics on your electrical power system.

• Conduct guided measurements for motor-drive input, DC bus, drive output, motor input and shaft measurements (MDA-550) with graphical step-by-step voltage and current connection diagrams.

• Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure.

• Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others.

• Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems.

Also Read : MDA 510/550 - Fluke Electronics 

7621 Hipot Tester - Microtest - Sinetec Automation Pvt . Ltd

7621 Hipot Tester - Microtest 

7621 is 8 channels Hipot tester. Applications include transformers, motors, capacitors, inductors, wires and wave filters.

• 8 Channel scanning test
• Graphics LCD window
• Built-in programmable PLC remote control interface
• Open/short detect function (7621)
• Connected to Impulse Winding Tester (7700)
• Provide AC high voltage, DC high voltage and insulation test
• Ramp time setting
• Built-in RS-232 interface

ISA DRTS 66 RELAYS, ENERGY METERS, TRANSDUCERS AND POWER QUALITY METERS

ISA DRTS 66 RELAYS, ENERGY METERS, TRANSDUCERS AND POWER QUALITY METERS

This advanced secondary injection relay test system and power system simulator is designed to satisfy all the needs related to commissioning and maintaining substations and to testing protection relays, energy meters, transducers and power quality meters. 

• Manual control with color display
• Simultaneously available: 6 Current and 6 Voltage plus 1 battery simulator outputs  
• High current outputs : 6 x 32 A, 3 x 64 A,1 x 128 A
• High power outputs: 6 x 430 VA, 3 x 860 VA, 1 x 1000 VA
• Voltage outputs: 6 x 300V at 100 VA
• High accuracy outputs: better than 0.05%
• IEC 61850 protocol interface
• USB and Ethernet interface
• Pen drive interface
• End to end test with GPS or IRIG-B
• Advanced testing and data management software TDMS
• Complete library of relays from the major manufacturers.

R&S®FPC1500 Spectrum Analyzer

R&S®FPC1500 Spectrum Analyzer

The R&S®FPC1500 is the only entry level spectrum analyzer with the value of three instruments – a spectrum analyzer, vector network analyzer and a signal generator all in one instrument.

Value of Three: The R&S®FPC1500 Spectrum Analyzer is the only spectrum analyzer on the market with three instruments in one – perfect for applications like IoT device development.

• RF performance engineered in Germany
• 10.1" WXGA (1366 x 768 pixel) display – largest and highest resolution in its class
• Frequency range from 5kHz to 1GHz, keycode upgradable to 2GHz/3GHz
• Resolution bandwidth settings down to 1Hz
• Tracking generator and independent CW signalgenerator
• Built-in VSWR bridge
• One-port vector network analyzer with Smith chart display
• App controlled through any iOS or Android device
• WiFi remote control❙3-year standard warranty

8845A 8846A 6.5 Digit Precision Multimeters

8845A 8846A 6.5 Digit Precision Multimeters

The Fluke 8845A and 8846A 6.5 digit multimeters have the precision and versatility to handle your most demanding measurements, on the bench or in a system. These DMMs are both high performance and feature rich, yet also remarkably easy to use.

These desktop multimeters perform the functions you would expect to see in a multifunction DMM, including measuring volts, ohms, and amps. Basic V dc accuracy of up to 0.0024 %, 10 A current range, and a wide ohms range give you an unbeatable combination of measurement capability.

You can also use the 8845A and 8846A DMMs to measure frequency and period. In addition, the 8846A measures temperature and capacitance. The functions of a counter, capacitance meter, and thermometer are built in for unparalleled versatility. Extend the meters’ utility even more with their graphical display modes, including TrendplotTM paperless recorder mode, statistics, and histograms—features you won’t find on other multimeters.

Of course, these desktop DMMs are also durable and dependable, features you expect from any Fluke meter. This unique combination of features and performance makes the 8845A and 8846A an unbeatable value for a wide variety of applications, including manufacturing test, research and development, and service.

Also Read  Fluke 8845A 6.5 Digit Precision Multimeter

Fluke 438-II Power Quality Analyzer & Motor Analyzer

Fluke 438-II Power Quality Analyzer & Motor Analyzer

Quickly and easily discover electrical and mechanical performance of electric motors, and evaluate power quality with a single test tool

The Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 435 Series II Power Quality Analyzers. Quickly and easily measure and analyze key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors. Fluke 434-II, 435-II and 437-II Power Quality Analyzer users can add motor analysis capabilities to their existing units with the Fluke-438-II/MA Motor Analyzer upgrade kit. The 438-II uses data from the motor rating plate for either NEMA or IEC rated motors to aid the calculation of the mechanical parameters.

Visit Demo Video

Key features:

The 438-II Power Quality Analyzer & Motor Analyzer helps you effectively evaluate electrical and mechanical performance just by hooking up voltage and measuring current, providing you with an unprecedented level of data.

Brings key motor analysis parameters like speed, torque and mechanical power and calculates motor efficiency without mechanical sensors

Includes full power quality and electrical energy analyzer functionality

Highest safety rating in industry; 1000 V CAT III / 600 V CAT IV

Also Read Fluke 438-II Power Quality and Motor Analyzer