Fluke 9132 - 9133 Portable Infrared Calibrator

 Fluke 9132 - 9133 Portable Infrared Calibrator

Precision when you need it for infrared temperature calibration

 

- Certify IR pyrometers from –30 °C to 500 °C (–22 °F to 932 °F)

- Large 57 mm (2.25 in) blackbody target

- RTD reference well for contact temperature measurement

- Small, compact design

 

Whether you’re using in-line or handheld infrared pyrometers, you need good calibration standards to verify their accuracy. Our portable IR calibrators provide stable blackbody targets for calibrating noncontact IR thermometers from –30 °C to 500 °C.

 

These units feature a temperature controlled measurement surface with a diameter of 2.25" (57 mm). The target temperature can be controlled in set-point increments of 0.1 ° from –30 °C to 500 °C and a well is located directly behind the blackbody surface for contact calibration.

infrared Calibrator

9132

 

For IR calibrations above normal ambient, the 9132 provides a stable measurement surface up to 500 °C (932 °F). Short heating and cooling times mean you won't have to wait long to get your work done.

 

9133

 

If you're calibrating IR guns at cold temperatures, you'll love our new 9133. With solid-state cooling technology, this new IR calibrator reaches –30 °C (22 °F) in normal ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice build up on the target can be avoided. At the upper end of its range, the 9133 provides stable temperatures to 160 °C (320 °F).

 

With heating and cooling times of about 15 minutes from ambient to either extreme, the 9133 gets you to temperature quickly and performs when it gets there.

Fluke 773 Milliamp Process Clamp Meter

Fluke 773 Milliamp Process Clamp Meter saves time and money by measuring output signals without shutting down the system

The Fluke 773 milliamp clamp meter is accurate and versatile. It saves time and money by measuring 4–20 mA signals five times faster than with traditional DMMs, and without breaking the loop. That means you can troubleshoot a live device without having to power down and possibly miss something going on in the process.

Milliamp Process Clamp Meter  

The 773 is ideal for troubleshooting transmitters, valves, and programmable logic controllers (PLCs) found in process plants. It measures low level dc current and correlates process indication with a real physical value. And it measures up to 99.0 mA non-contact, including 10 to 50 mA signals in older control systems.

The 773 also sources and measures dc voltage, so it can be used to troubleshoot voltage input and output devices. You can detach the clamp section of the meter and use it as a remote jaw, connected to the main body by an extension cable to make it easier to take measurements in tight spaces. Plus, automatic power-off features save battery life so you can work longer without changing the batteries.

Other useful features:

• Sources DC voltage to test input devices that accept a 1-5V or 0 to 10V signal
• Simultaneously measures the mA signal with the clamp and sources a mA signal
• Measures mA signals for PLC and control system analog I/O
• Simulates 4-20 mA signals for testing control system I/O
• Features a detachable clamp with extension cable for measurements in tight locations
• Extends battery life with auto-off and backlight timeout
• Captures and displays changing measurements with Hold function
• Measures 4 to 20 mA signals with in-circuit measurement
• Includes simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
• Offers mA or voltage output linear ramp or 25% step output
• Provides scaled mA output to provide a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
• Enables milliamp signal logging to a separate logging device without breaking the loop
• Applies a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight to illuminate hard to see wires in dark enclosure
• Measures 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically changes the 4 to 20 mA output for remote testing

R&S SMB100A Microwave Signal Generator

R&S SMB100A Microwave Signal Generator

The compact, versatile R&S®SMB100A microwave signal generator with a frequency range up to 40 GHz provides outstanding spectral purity and high output power. In addition, it features easy operation, comprehensive functionality and low cost of ownership.

R&S SMB100A Microwave Signal Generator

For even higher frequencies, the frequency range of the R&S®SMB100A can be easily extended with the R&S®SMZ frequency multiplier. The R&S®SMB100A plus R&S®SMZ solution combines easy handling with precise, adjustable output levels in the frequency range from 50 GHz to 110 GHz (adjustable output levels are not possible with R&S®SMZ170).

Key facts:

- Wide frequency range from 100 kHz to 40 GHz

- Excellent signal characteristics with low SSB phase noise of typ. –128 dBc (at 1 GHz, 20 kHz offset)

- High output power of up to +27 dBm (meas.)

- All important analog modulations with AM, FM/φM and pulse modulation supported

- Compact size with only two height units and low weight

Fluke 724 Temperature Calibrator

Fluke 724 Temperature Calibrator

Fluke 724 Temperature Calibrator The Fluke 724 is powerful yet easy-to-use temperature calibrator that sources and measures 10 thermocouple types, and 7 RTD types, plus volts and ohms. It also measures mA while supplying loop power

Temperature Calibrator

Key features:

• A powerful, easy-to-use calibrator that measures and sources functions to test and calibrate most temperature instruments
• Displays input and output simultaneously on the easy-to-read dual display
• Measures RTDs, thermocouples, ohms, and volts to test sensors and transmitters
• Source/simulates thermocouples, RTDs, volts, and ohms to calibrate transmitters

R&S ZVL Vector Network Analyzers

R&S ZVL Vector Network Analyzers

The R&S®ZVL is a cost-efficient, powerful, and portable network analyzer in the compact class, and is therefore ideal for use in development, production, and service. It is the only instrument to combine the functions of a network analyzer, spectrum analyzer, and power meter in a single box, and will thus tremendously increase your work efficiency.

Vector Network Analyzers

Key facts:

- Optional spectrum analysis and digital communications standards

- Bidirectional test set for displaying all four S-parameters

- R&S®ZVL3-75: 75 Ω vector network analyzer for TV and CATV measurements

- Multitrace display for displaying all relevant parameters

- Distance-to-fault measurement for detecting cable faults

- Time domain analysis

- USB connector for R&S®NRP-Z power sensor series for precise power measurements

- Internal battery and 12 V DC operation

- Small, compact, lightweight and portable

Fluke 5650 Type R and Type S Thermocouple Standards

Fluke 5650 Type R and Type S Thermocouple Standards

Made from the finest platinum and platinum-rhodium alloy, these type R thermocouples and type S thermocouples cover a temperature range of 0 °C to 1450 °C with uncertainties as good as 0.15 °C over most of that range. With four different models for each type, we have the type R thermocouple and type S thermocouple to fit your application.

type r thermocouple

Eight models to fit any type R or S thermocouple application:

- Designed by the Fluke Calibration primary temperature standards design team

- Two sizes available, each with or without reference junction

- Uncalibrated accuracy is the greater of ±0.6°C or ±0.1% of reading

Fluke 985 Particle Counter

Fluke 985 Particle Counter 

Take a new look at indoor air quality.

The Fluke 985 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining airborne particle concentrations. Use the Fluke 985 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.

With the Fluke 985 you can:

• Measure filter efficiency
• Monitor industrial cleanrooms
• Pre-screen indoor air quality and confidently work with IAQ specialists
• Locate particle sources for remediation
• Report the effectiveness of repairs to customers
• Drive additional business by demonstrating the need for maintenance and repair

• With a large screen, intuitive icons for navigation and on-screen data presentation, the Fluke 985 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 985 is lightweight and easy to use in any position and with easy data export options using USB cable, memory stick it’s easy to review and analyze the data anywhere and anytime.

Particle Counter

Visit Demo Video

Key features

Assess air quality more easily and accurately.

Six channels and particle size range of 0.3 - 10.0 µm: Assures accurate measurements even for critical locations requiring ISO Class 5 – 9 certification.
Ultra-lightweight and ergonomic design: Promises easy single-hand operation in tight or awkward spaces with less operator fatigue.
Long battery life: Ten hours of standard-use battery life to last a full work day
Large 3.5 QVGC Color display: Easy navigation and viewing with the intuitive icons and large font options
10,000 record storage: Quick access to historical data
On-screen data presentation: Data can be viewed in a traditional tabular or trend graph view at the user’s preference
Personalized setting and configurations: Customizable settings for the display, sample methods, and alarm settings for sample count
Data export options: Download data to a PC using a USB memory stick, USB cable or Ethernet connection. No special software is required to download or view data
Option password control: Confirms security when required USB/Ethernet charge cradle: Assures device is always ready to go when needed