R&S UPP 800 Audio Analyzer

 R&S UPP 800 Audio Analyzer

High measurement speed, parallel signal processing in multichannel applications, and high reliability in continuous operation are vital requirements to be met by audio analyzers for use in production. If, on top of that, a cost-efficient instrument for system use is what you need, the solution is the R&S®UPP audio analyzer.

The R&S®UPV audio analyzer – the high-end instrument from Rohde & Schwarz – has held a solid position in all audio T&M applications for years. Measurement accuracy and dynamic range at the limits of what is possible, combined with unique measurement capabilities, make the R&S®UPV ideal primarily for research, development and quality assurance tasks.

Many audio applications do not place such high requirements on dynamic range and versatility. The emphasis in production is often on high throughput, and the cost of production test assemblies also plays a major role. When testing consumer audio equipment, multichannel devices of surround-sound systems must also be measured using state-of-the-art interfaces such as HDMI. This is where the R&S®UPP audio analyzer family comes into its own. Depending on the model, two, four or eight channels are processed in parallel; and by cascading multiple instruments, users can simultaneously trigger up to 48 measurement channels, which cuts down on measurement time.

The compact cost-efficient R&S®UPP audio analyzer is designed for system applications. It features low height, and comes without front-panel control elements or integrated display. The instrument can be remote-controlled via LAN, USB or IEC/IEEE bus. In combination with an external monitor, mouse and keyboard, it becomes a manually operable measuring instrument for a lab bench. It has an integrated control PC, and the required software is already installed. Users can start taking measurements right away.

Featuring the same operating philosophy and remote control, the R&S®UPV and R&S®UPP audio analyzers are a strong team: They provide the optimal solution for both R & D and production, respectively, and harmonize well together, for example when instrument settings or measurement routines have to be exchanged.

Key Facts

- Suitable for all interfaces: analog, digital and combined

- Parallel measurements on up to eight channels

- Up to 80 kHz bandwidth and 200 kHz sampling rate

- User-programmable filters for analyzer and generator

- Compact instrument with integrated PC and low height

For More Details Please Visit

Fluke 6531, 6532 E-DWT Electronic Deadweight Tester Kits

A powerful, complete hydraulic pressure calibration system to cover a wide workload

Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:

• No weights to load and unload, transport or send out for calibration
• Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
• No piston-cylinder changes
• No significant sensitivity to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• Operates in any unit of measure, switching easily from one unit to the next
• The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.

                                                                    Visit Demo Video

Deadweight Tester

High performance calibration made simple:

Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box.

R&S®ZNLE Vector Network Analyzer - Media Center

The R&S®ZNLE makes vector network analyzer measurements as easy as ABC: easy to configure, easy to calibrate, easy to measure. The renowned high-quality design, an innovative user interface and its compact size make the R&S®ZNLE ideal for basic VNA applications.

The R&S®ZNLE is a two-port vector network analyzer that can be used for bidirectional measurements of S-parameters S11, S21, S12 and S22 on passive components. Configuring the R&S®ZNLE requires only three decisions:

- Choose the frequency range

- Decide whether you need a GPIB interface

- Decide whether you need to perform time-domain analysis or   distance-to-fault measurements

vector network analyzer

Visit Demo Video

The analyzer is available with a frequency range of 100 kHz to 3 GHz (R&S®ZNLE3 with R&S®ZNLE-B100 option) or 100 kHz to 6 GHz (R&S®ZNLE6 with R&S®ZNLE-B100 option). The optional GPIB interface lets you connect a controller to remotely control the R&S®ZNLE. As a standalone instrument, the R&S®ZNLE does not require an external PC to configure the setup. You can start measuring immediately after you switch on the instrument.

You can start measuring immediately after you switch on the instrument. The time domain analysis option (R&S®ZNL-K2) and distance-to-fault measurements option (R&S®ZNL-K3) enhance the R&S®ZNLE with essential features for general purpose testing.

Fluke 6003A Three Phase Electrical Power Calibrator

Fluke 6003A Three Phase Electrical Power Calibrator

Three power phases in a single easy-to-use instrument

The Fluke Calibration 6003A Three Phase Electrical Power Calibrator is the most cost-effective way to get the superior accuracy and performance of three independent phases in one instrument. It is an ideal solution for calibration laboratories, electronics manufacturers, electric utility meter shops, and other organizations that manufacture and maintain energy meters, power quality analyzers, and similar tools.

3 phase power

Please Visit  Fluke 6003A Three Phase Electrical Power Calibrator Intro Video

Features at a glance:

• Three phases in a single instrument
• Cost effective
• Easy to use
• Simulates dc or ac electrical power and energy in voltage range to 600 ac V or 280 dc V and current range to 30 A per phase or 90 A combined
• Phase shift between voltage and current channels can be set from 0° to 359.99°
• Specifications of ± 375 ppm for power and  0.01° for phase 
• Current outputs can be isolated from ground by up to 450 V peak
• Optional energy and power quality  capabilities
• Built-in dc multimeter for transducer output measurement
• Offers a high current adapter for applications needing from 30 A to  90 A of current

Fluke RSE300 RSE600 Mounted Infrared Camera

Fluke RSE300 RSE600 Mounted Infrared Camera

When there’s more to infrared than meets the eye.

Introducing the first ever fully-radiometric, mounted Fluke infrared cameras – the RSE series. Equipped with advanced features and software plug-ins to MATLAB® and LabVIEW®, these tools are ideal for continuously streaming and analyzing infrared data.

Designed for your research, science and engineering needs, enhance your testing and quality assurance procedures by mounting the RSE600 to your workstation. Continuously stream up to 60 frames of data per second directly to your computer to monitor minute temperature differences, and analyze videos frame-by-frame remotely from SmartView® desktop software. Enhance your viewing experience with optional add-on lenses to target different applications (analyzing from a distance, or getting the close-up details).

Don’t just see the heat. Stream, measure and analyze it too.

With plug-ins to MATLAB® and LabVIEW®, the RSE Infrared Cameras are ideal for testing and development. Looking for a more robust software to monitor and archive process manufacturing data 24/7? We recommend the ThermoView® series by Fluke Process Instruments. See a quick comparison.

        Visit Demo Video

infrared camera price

Key features:

- MATLAB® and LabVIEW® software compatibility allows users to  integrate infrared data, images    and videos to support R&D  analysis

- 640 x 480 resolution

- See the details you need with optional smart lenses: 2x and    4x telephoto, wide angle and macro         lenses

- Optimize images, generate customizable reports and export   images to the format of your choice         with SmartView® desktop   software

- Wirelessly connect your camera to the Fluke Connect® system   to easily share and edit images

Fluke 368 FC & 369 FC Leakage Current Clamp Meters

Fluke 368 FC & 369 FC Leakage Current Clamp Meters

The Fluke 369 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line.

 The Fluke 369 FC has an oversize 61 mm jaw for work with extra-large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

Leakage Clamp Meters

The 369 FC also offers wireless data connectivity via Fluke Connect. As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 369 FC allows you to track changes in leakage current over time, helping to identify potential problems before they turn into major failures

Key features:

- True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
- 61 mm jaw opening
- Highest resolution of 1 μA, measure up to 60 A
- Selectable filter function removes unwanted noise
- Max/Min/Average readings and hold function
- Forward-facing LED worklight for use in dark wiring cabinets
- Backlit display; auto backlight off and auto power off for extended battery life
- CAT III 600V safety rating

Fluke Calibration 2700G Series Reference Pressure Gauges

Fluke Calibration 2700G Series Reference Pressure Gauges

The 2700G has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one custom engineering unit. To ensure against incorrect measurements, each of the above functions can be locked from use through the supervisor menu.

The 2700G Reference Pressure Gauge can be combined with the Fluke Calibration P5500 series of comparison test pumps to make a complete pressure calibration system. The unique test port design of the P5500 series allows for hand tight connection of the 2700G without the use of PTFE tape.

Fluke 2700G Introduction and Demonstration Video

Feautres:

• Precision pressure measurement from 100 KPa [15 psi] to 70  MPa [10 000 psi]
• Accuracy to 0.02% of full scale
• Easy-to-use, rugged construction for reliable performance
• Combine with the 700PTPK or 700HTPK pump kits for a complete poratble pressure testing solution for up to  Mpa [600 psi] with the PTP-1 pneumatic pump and up to 70 Mpa [10 000 psi]   with the HTP-2 hydraulic pump.
• Combine with the P5510, P5513, P5514, or P5515 Comparison Test Pump for a complete bench top  pressure calibration   solution.
• Test port is 1/ NPT Male, 1/ BSP and M20 X 1.5 adaptors are  included standard.
• USB communications cable and universal power.

Also Read digital pressure gauges