TDX 5000 is developed as a compact solution for high voltage Capacitance and Tan Delta (Dissipation Factor) measurements. Using the reactor option, TDX 5000 can also perform tests on rotating machines.
Fully automatic
Variable output frequency: 1 - 500 Hz
Output voltage up to 12 kV
Tan Delta, capacitance, dissipation factor measurements and exciting current test
PADS - Power Apparatus Diagnostic Software for automatic testing, assessment and report
USB interface and Ethernet interface for PC connection
Patented technology for capacitance and Tan Delta measurement
Due to their high accuracy and fast load recovery time, the R&S®NGL200 power supply series is perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable them to handle fast load changes that occur for example when mobile communications devices switch from sleep mode to transmit mode.
The P3100 Models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. These robust instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.
Visit Video Demo
The P3100 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation these deadweight testers can be used to calibrate virtually any pressure sensing device, including transducers, transmitters, gauges or pressure switches.
Each instrument is supplied with a detachable lid which makes it neat, compact and easily portable. The weight masses are stored in a high-quality case with a self locking mechanism to protect them during transit.
All units are provided with a traceable certificate of accuracy, weight mass details, 1/8 inch, 1/4 inch, 3/8 inch and 1/2 inch NPT or BSP female adaptors, operating fluid (where applicable) and spare seals.
The piston/cylinder assemblies are manufactured to the very highest standards with certified accuracies traceable to international standards laboratories such as the National Institute of Standards and Technology (NIST).
Key features
Pressure ranges to 60,000 psi (4000 bar)
0.015% of reading accuracy standard (0.008% optional)
Fluke DS703 FC Diagnostic Scope,7” capacitive touch screen for accurate diagnostics in difficult to reach spaces. 720p video recording inspection camera. Adjustable LED lighting and digital zoom for quality images. Up is Up® technology rotates the display screen to allow for appropriate image display, regardless of the orientation of the probe.
Visit Demo Video
Save time with the Fluke Connect® system
Wirelessly sync images directly from your diagnostic scope to the Fluke Connect® system, and attach to an asset record or work order. Having access to maintenance records simultaneously at the inspection site and from the office or an off-site location enables faster decision making and real-time collaboration between team members. You can also live stream images or videos from the diagnostic scope to a smartphone or PC.
Expand the flexibility of your videoscope with optional probes offering cameras that range in diameter from 3.8 MM to 8.5 MM and probes as long as 20 meters. Equip yourself the right probe for your environment.
The 6376 LCR Meter that is provided with high accuracy and speed. It is a cost and multiple- function utility and is able to perform the component test entirely. 6376 can collocate with DC Bias. The friendly operation interface design is in synchronization with the international trend and easy to operate to import into the production lines quickly. Synchronous tests with multiple parameter settings. Because of the high-precision values of measured data and superior efficacy, it must be a necessary testing instrument of components and materials. It supports the interfaces of RS232, LAN, USB and GPIB PC connections.
Basic accuracy up to 0.1%
Synchronous tests with multiple parameter settings
Measurement of wide range of functions: Freq. to 5 Digits, signal level of 10mV to 2Vrms
Collocating DC Bias to progressing current scanning analysis
Fixture design capabilities, Specific customized services for clients
LCR Meters are all compatible with convenient and efficient Meter Link Software
The ultimate all-in-one circuit breaker analyzer: safer, faster and more accurate than ever. It allows any timing test, motion and speed analysis, multiple contemporary static and dynamic contact resistance measurements, Both Sides Grounded (BSG) tests, Undervoltage condition test and more. All these functions are integrated in a single lightweight test case without the need of connecting additional external modules.
Faster: one single connection set up to perform automatically all possible Circuit Breaker tests
Safer: Both Side Grounded feature without any additional external boxes/modules
Three/Six/Nine static and dynamic contact resistance measurement – 200A DC output each
Three phase first trip measurement
16 or 24 fully user configurable Main/PIR and auxiliary input contacts
2, 4 or 6 Open / Close coil commands
3 analog linear/rotary transducers and 3 digital transducers inputs for travel/ speed analysis
8 analog input measurements: battery voltage, motor current, pressure transducers and other measurements
Minimum voltage trip coil test, fully automatic
On-screen control and test results evaluation
TDMS software suite for analysis, archiving and test report creation
Library of standard test plans available with the test sets
General Product data applies under the following conditions:
Three hours storage at ambient temperature followed by 30 minutes warm-up operation
Specified environmental conditions met
Recommended calibration interval adhered to
All internal automatic adjustments performed, if applicable
Key facts
Bandwidth: 100 MHz to 1GHz
Sample rate: up to 5 Gsample/s
Memory depth: up to 80 Msample
ADC resolution: 10-bit
Display: 10.1’’ capacitive touchscreen
See more of your signal with the power of 10
Designed as daily problem-solving tool, the R&S®RTM3000 combines the power of ten (10-bit ADC, 10 times the memory and 10.1" touchscreen) with a Rohde & Schwarz probe interface for all Rohde & Schwarz probes.
Four times more vertical resolution than standard 8-bit ADCs
