Fluke 9132 - 9133 Portable Infrared Calibrator

 Fluke 9132 - 9133 Portable Infrared Calibrator

Precision when you need it for infrared temperature calibration

 

- Certify IR pyrometers from –30 °C to 500 °C (–22 °F to 932 °F)

- Large 57 mm (2.25 in) blackbody target

- RTD reference well for contact temperature measurement

- Small, compact design

 

Whether you’re using in-line or handheld infrared pyrometers, you need good calibration standards to verify their accuracy. Our portable IR calibrators provide stable blackbody targets for calibrating noncontact IR thermometers from –30 °C to 500 °C.

 

These units feature a temperature controlled measurement surface with a diameter of 2.25" (57 mm). The target temperature can be controlled in set-point increments of 0.1 ° from –30 °C to 500 °C and a well is located directly behind the blackbody surface for contact calibration.

infrared Calibrator

9132

 

For IR calibrations above normal ambient, the 9132 provides a stable measurement surface up to 500 °C (932 °F). Short heating and cooling times mean you won't have to wait long to get your work done.

 

9133

 

If you're calibrating IR guns at cold temperatures, you'll love our new 9133. With solid-state cooling technology, this new IR calibrator reaches –30 °C (22 °F) in normal ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice build up on the target can be avoided. At the upper end of its range, the 9133 provides stable temperatures to 160 °C (320 °F).

 

With heating and cooling times of about 15 minutes from ambient to either extreme, the 9133 gets you to temperature quickly and performs when it gets there.

Fluke 773 Milliamp Process Clamp Meter

Fluke 773 Milliamp Process Clamp Meter saves time and money by measuring output signals without shutting down the system

The Fluke 773 milliamp clamp meter is accurate and versatile. It saves time and money by measuring 4–20 mA signals five times faster than with traditional DMMs, and without breaking the loop. That means you can troubleshoot a live device without having to power down and possibly miss something going on in the process.

Milliamp Process Clamp Meter  

The 773 is ideal for troubleshooting transmitters, valves, and programmable logic controllers (PLCs) found in process plants. It measures low level dc current and correlates process indication with a real physical value. And it measures up to 99.0 mA non-contact, including 10 to 50 mA signals in older control systems.

The 773 also sources and measures dc voltage, so it can be used to troubleshoot voltage input and output devices. You can detach the clamp section of the meter and use it as a remote jaw, connected to the main body by an extension cable to make it easier to take measurements in tight spaces. Plus, automatic power-off features save battery life so you can work longer without changing the batteries.

Other useful features:

• Sources DC voltage to test input devices that accept a 1-5V or 0 to 10V signal
• Simultaneously measures the mA signal with the clamp and sources a mA signal
• Measures mA signals for PLC and control system analog I/O
• Simulates 4-20 mA signals for testing control system I/O
• Features a detachable clamp with extension cable for measurements in tight locations
• Extends battery life with auto-off and backlight timeout
• Captures and displays changing measurements with Hold function
• Measures 4 to 20 mA signals with in-circuit measurement
• Includes simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
• Offers mA or voltage output linear ramp or 25% step output
• Provides scaled mA output to provide a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
• Enables milliamp signal logging to a separate logging device without breaking the loop
• Applies a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight to illuminate hard to see wires in dark enclosure
• Measures 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically changes the 4 to 20 mA output for remote testing

R&S SMB100A Microwave Signal Generator

R&S SMB100A Microwave Signal Generator

The compact, versatile R&S®SMB100A microwave signal generator with a frequency range up to 40 GHz provides outstanding spectral purity and high output power. In addition, it features easy operation, comprehensive functionality and low cost of ownership.

R&S SMB100A Microwave Signal Generator

For even higher frequencies, the frequency range of the R&S®SMB100A can be easily extended with the R&S®SMZ frequency multiplier. The R&S®SMB100A plus R&S®SMZ solution combines easy handling with precise, adjustable output levels in the frequency range from 50 GHz to 110 GHz (adjustable output levels are not possible with R&S®SMZ170).

Key facts:

- Wide frequency range from 100 kHz to 40 GHz

- Excellent signal characteristics with low SSB phase noise of typ. –128 dBc (at 1 GHz, 20 kHz offset)

- High output power of up to +27 dBm (meas.)

- All important analog modulations with AM, FM/φM and pulse modulation supported

- Compact size with only two height units and low weight

Fluke 724 Temperature Calibrator

Fluke 724 Temperature Calibrator

Fluke 724 Temperature Calibrator The Fluke 724 is powerful yet easy-to-use temperature calibrator that sources and measures 10 thermocouple types, and 7 RTD types, plus volts and ohms. It also measures mA while supplying loop power

Temperature Calibrator

Key features:

• A powerful, easy-to-use calibrator that measures and sources functions to test and calibrate most temperature instruments
• Displays input and output simultaneously on the easy-to-read dual display
• Measures RTDs, thermocouples, ohms, and volts to test sensors and transmitters
• Source/simulates thermocouples, RTDs, volts, and ohms to calibrate transmitters

R&S ZVL Vector Network Analyzers

R&S ZVL Vector Network Analyzers

The R&S®ZVL is a cost-efficient, powerful, and portable network analyzer in the compact class, and is therefore ideal for use in development, production, and service. It is the only instrument to combine the functions of a network analyzer, spectrum analyzer, and power meter in a single box, and will thus tremendously increase your work efficiency.

Vector Network Analyzers

Key facts:

- Optional spectrum analysis and digital communications standards

- Bidirectional test set for displaying all four S-parameters

- R&S®ZVL3-75: 75 Ω vector network analyzer for TV and CATV measurements

- Multitrace display for displaying all relevant parameters

- Distance-to-fault measurement for detecting cable faults

- Time domain analysis

- USB connector for R&S®NRP-Z power sensor series for precise power measurements

- Internal battery and 12 V DC operation

- Small, compact, lightweight and portable

Fluke 5650 Type R and Type S Thermocouple Standards

Fluke 5650 Type R and Type S Thermocouple Standards

Made from the finest platinum and platinum-rhodium alloy, these type R thermocouples and type S thermocouples cover a temperature range of 0 °C to 1450 °C with uncertainties as good as 0.15 °C over most of that range. With four different models for each type, we have the type R thermocouple and type S thermocouple to fit your application.

type r thermocouple

Eight models to fit any type R or S thermocouple application:

- Designed by the Fluke Calibration primary temperature standards design team

- Two sizes available, each with or without reference junction

- Uncalibrated accuracy is the greater of ±0.6°C or ±0.1% of reading

Fluke 985 Particle Counter

Fluke 985 Particle Counter 

Take a new look at indoor air quality.

The Fluke 985 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining airborne particle concentrations. Use the Fluke 985 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.

With the Fluke 985 you can:

• Measure filter efficiency
• Monitor industrial cleanrooms
• Pre-screen indoor air quality and confidently work with IAQ specialists
• Locate particle sources for remediation
• Report the effectiveness of repairs to customers
• Drive additional business by demonstrating the need for maintenance and repair

• With a large screen, intuitive icons for navigation and on-screen data presentation, the Fluke 985 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 985 is lightweight and easy to use in any position and with easy data export options using USB cable, memory stick it’s easy to review and analyze the data anywhere and anytime.

Particle Counter

Visit Demo Video

Key features

Assess air quality more easily and accurately.

Six channels and particle size range of 0.3 - 10.0 µm: Assures accurate measurements even for critical locations requiring ISO Class 5 – 9 certification.
Ultra-lightweight and ergonomic design: Promises easy single-hand operation in tight or awkward spaces with less operator fatigue.
Long battery life: Ten hours of standard-use battery life to last a full work day
Large 3.5 QVGC Color display: Easy navigation and viewing with the intuitive icons and large font options
10,000 record storage: Quick access to historical data
On-screen data presentation: Data can be viewed in a traditional tabular or trend graph view at the user’s preference
Personalized setting and configurations: Customizable settings for the display, sample methods, and alarm settings for sample count
Data export options: Download data to a PC using a USB memory stick, USB cable or Ethernet connection. No special software is required to download or view data
Option password control: Confirms security when required USB/Ethernet charge cradle: Assures device is always ready to go when needed

R&S NRX Power Meter

R&S NRX Power Meter

The new R&S NRX power meter is equipped with a touchscreen based operating concept that guides user through configuration. For the first time, both terminating and directional power sensors are supported in a single instrument

R&S®NRX versatile, User-friendly base:

The R&S®NRX simultaneously supports up to four power sensors of the R&S®NRP and R&S®NRQ family. Function keys on the front panel provide quick access to the most important functions. Users can open the frequency setting menu or zero the connected sensors at the push of button.User-programmable save/recall memory locations allow fast access to personal settings. Presets for all major mobile radio standards,such as 3GPP LTE, 3GPP WCDMA,GSM/EDGE,WLAN and Bluetooth®,ensure correct measurement with a minimum of keystrokes.

The 5" TFT color display supports the intuitive, window based operating concept. Key parameters and functions are color-coded and can be seen at a glance Results are presented in numerical and graphical display

windows that can be easily configured.

In the continuous average, burst average, timeslot and time gate average measurement modes, up to four numerical results can be displayed in parallel. The ratio, SWR,return loss and reflection coefficient can be calculated from two measurement channels using predefined computation functions and displayed in addition to the absolute and relative power level. 

Trace measurements and statistical measurements are presented in graphical windows. The trace mode allows simultaneous display of two traces in one measurement window. Level differences and time offset can be seen at a glance and accurately measured using horizontal and vertical markers. It is also possible to display the ratio of two traces. Timeslots and time gates as well as the associated measurement values (average, peak or crest factor) can be graphically displayed in the trace window. All R&S®NRP-Z8x wideband power sensors allow automatic pulse analysis. Up to 12 of 18 user-selected pulse parameters can be displayed in addition to the measurement trace.The statistical amplitude distribution of the envelope power is shown as CCDF, CDF or PDF in a statistics window

Fluke 424D Laser Distance Meter

Fluke 424D Laser Distance Meter 

The Fluke 424D is our most sophisticated laser distance meter packed with versatile features to save you more time in more situations. It extends your measurement reach to 100 meters (330 feet). It offers a bigger, 4-line display, a built-in compass, and a 180° inclination sensor for leveling and height tracking.

The Fluke 424D is our most sophisticated laser distance meter packed with versatile features to save you more time in more situations and reduce errors. Just point and click to instantly measure up to 100 meters (330 ft.), accurate to + 1 mm. No scales to interpret or misread. The extra bright laser supports easy targeting even at longer distances. Extra features like a 180º inclination sensor, the corner angle feature, and a built-in compass make it easy to get accurate measurements in hard-to-reach locations. You'll be able to see the results more clearly on the large, four-line backlit display. No matter your job, the 424D laser distance meter will help you do the work of two people on your own.

Laser Distance Meter 

Visit Product Demo Video

                                                                                   

Key features:

• Versatile laser distance meter that instantly measures up to 100 meters (330 feet) with one-button point-and-click operation
• Quickly calculates area (square feet/meters) and volume
• Includes 180° inclination sensor for leveling and height tracking
• Offers enhanced Pythagoras calculation for determining distance indirectly from three other measurements 

Fluke 1560 Black Stack Thermometer Readout

Fluke 1560 Black Stack Thermometer Readout

Fluke Calibration’s Black Stack thermometer readout has been on the market for many years and has established itself as one of the most versatile, cost-effective, accurate readouts in the world.

Accurate, expandable and configurable readout

- Reads SPRTs, RTDs, thermistors, and thermocouples

- Any configuration you like up to eight modules

- High-accuracy reference thermometer (to ±0.0013°C)

- Automates precision data acquisition

The 1560 Black Stack thermometer readout can be any kind of thermometer you want it to be, and it works in three distinctive ways.

It’s a reference thermometer with an accredited calibration; it’s an automated calibration system reading your reference probe and sensors you’re testing; or it’s a high-accuracy data acquisition system. And it does each of these functions better than any other thermometer currently on the market.

The Stack consists of up to eight different modules that fit together to do any type of thermometry you choose. You can buy all of them, or any combination of them, and change the Stack and its functions anytime you want. Each module stacks behind the preceding one, and when you add a module, the Stack’s software automatically reconfigures itself to include all of the new functions supplied by that module. There’s nothing to take apart. No boards need to be installed. There’s no software to load, and nothing has to be calibrated. Just stack a new module onto the back of the previous modules and you’re ready to use the Black Stack and all of its remarkable features.

Fluke Calibration’s new Model 9935 Multi Channel LogWare makes the Black Stack an even more powerful data acquisition tool. LogWare provides graphical and statistical analysis of each channel you’re measuring (up to 96 with the Black Stack). And with alarms that can be customized, delayed start times, and selectable logging intervals, LogWare turns the Black Stack into the most powerful temperature data acquisition tool on the market.

Fluke 925 Vane Anemometer

Fluke 925 Vane Anemometer

Fluke 925 Vane Anemometer Ability to measure wind speed in feet per minute or meters per second. Data capture using one button and the ability to average multiple readings. Min and Max alarm setting to alert the user when limits have been met.

fluke anemometer

Key features:

 

- Ability to measure wind speed in feet per minute or meters per second

- Data capture using one button and the ability to average multiple readings

- Min and Max alarm setting to alert the user when limits have been met

- Durable over mold housing to protect the unit from drops

- 1 M extension of sensor from display to ensure air flow is captured in hard to reach      locations

R&S UPP 800 Audio Analyzer

 R&S UPP 800 Audio Analyzer

High measurement speed, parallel signal processing in multichannel applications, and high reliability in continuous operation are vital requirements to be met by audio analyzers for use in production. If, on top of that, a cost-efficient instrument for system use is what you need, the solution is the R&S®UPP audio analyzer.

The R&S®UPV audio analyzer – the high-end instrument from Rohde & Schwarz – has held a solid position in all audio T&M applications for years. Measurement accuracy and dynamic range at the limits of what is possible, combined with unique measurement capabilities, make the R&S®UPV ideal primarily for research, development and quality assurance tasks.

Many audio applications do not place such high requirements on dynamic range and versatility. The emphasis in production is often on high throughput, and the cost of production test assemblies also plays a major role. When testing consumer audio equipment, multichannel devices of surround-sound systems must also be measured using state-of-the-art interfaces such as HDMI. This is where the R&S®UPP audio analyzer family comes into its own. Depending on the model, two, four or eight channels are processed in parallel; and by cascading multiple instruments, users can simultaneously trigger up to 48 measurement channels, which cuts down on measurement time.

The compact cost-efficient R&S®UPP audio analyzer is designed for system applications. It features low height, and comes without front-panel control elements or integrated display. The instrument can be remote-controlled via LAN, USB or IEC/IEEE bus. In combination with an external monitor, mouse and keyboard, it becomes a manually operable measuring instrument for a lab bench. It has an integrated control PC, and the required software is already installed. Users can start taking measurements right away.

Featuring the same operating philosophy and remote control, the R&S®UPV and R&S®UPP audio analyzers are a strong team: They provide the optimal solution for both R & D and production, respectively, and harmonize well together, for example when instrument settings or measurement routines have to be exchanged.

Key Facts

- Suitable for all interfaces: analog, digital and combined

- Parallel measurements on up to eight channels

- Up to 80 kHz bandwidth and 200 kHz sampling rate

- User-programmable filters for analyzer and generator

- Compact instrument with integrated PC and low height

For More Details Please Visit

Fluke 6531, 6532 E-DWT Electronic Deadweight Tester Kits

A powerful, complete hydraulic pressure calibration system to cover a wide workload

Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:

• No weights to load and unload, transport or send out for calibration
• Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
• No piston-cylinder changes
• No significant sensitivity to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• Operates in any unit of measure, switching easily from one unit to the next
• The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.

                                                                    Visit Demo Video

Deadweight Tester

High performance calibration made simple:

Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box.

R&S®ZNLE Vector Network Analyzer - Media Center

The R&S®ZNLE makes vector network analyzer measurements as easy as ABC: easy to configure, easy to calibrate, easy to measure. The renowned high-quality design, an innovative user interface and its compact size make the R&S®ZNLE ideal for basic VNA applications.

The R&S®ZNLE is a two-port vector network analyzer that can be used for bidirectional measurements of S-parameters S11, S21, S12 and S22 on passive components. Configuring the R&S®ZNLE requires only three decisions:

- Choose the frequency range

- Decide whether you need a GPIB interface

- Decide whether you need to perform time-domain analysis or   distance-to-fault measurements

vector network analyzer

Visit Demo Video

The analyzer is available with a frequency range of 100 kHz to 3 GHz (R&S®ZNLE3 with R&S®ZNLE-B100 option) or 100 kHz to 6 GHz (R&S®ZNLE6 with R&S®ZNLE-B100 option). The optional GPIB interface lets you connect a controller to remotely control the R&S®ZNLE. As a standalone instrument, the R&S®ZNLE does not require an external PC to configure the setup. You can start measuring immediately after you switch on the instrument.

You can start measuring immediately after you switch on the instrument. The time domain analysis option (R&S®ZNL-K2) and distance-to-fault measurements option (R&S®ZNL-K3) enhance the R&S®ZNLE with essential features for general purpose testing.

Fluke 6003A Three Phase Electrical Power Calibrator

Fluke 6003A Three Phase Electrical Power Calibrator

Three power phases in a single easy-to-use instrument

The Fluke Calibration 6003A Three Phase Electrical Power Calibrator is the most cost-effective way to get the superior accuracy and performance of three independent phases in one instrument. It is an ideal solution for calibration laboratories, electronics manufacturers, electric utility meter shops, and other organizations that manufacture and maintain energy meters, power quality analyzers, and similar tools.

3 phase power

Please Visit  Fluke 6003A Three Phase Electrical Power Calibrator Intro Video

Features at a glance:

• Three phases in a single instrument
• Cost effective
• Easy to use
• Simulates dc or ac electrical power and energy in voltage range to 600 ac V or 280 dc V and current range to 30 A per phase or 90 A combined
• Phase shift between voltage and current channels can be set from 0° to 359.99°
• Specifications of ± 375 ppm for power and  0.01° for phase 
• Current outputs can be isolated from ground by up to 450 V peak
• Optional energy and power quality  capabilities
• Built-in dc multimeter for transducer output measurement
• Offers a high current adapter for applications needing from 30 A to  90 A of current

Fluke RSE300 RSE600 Mounted Infrared Camera

Fluke RSE300 RSE600 Mounted Infrared Camera

When there’s more to infrared than meets the eye.

Introducing the first ever fully-radiometric, mounted Fluke infrared cameras – the RSE series. Equipped with advanced features and software plug-ins to MATLAB® and LabVIEW®, these tools are ideal for continuously streaming and analyzing infrared data.

Designed for your research, science and engineering needs, enhance your testing and quality assurance procedures by mounting the RSE600 to your workstation. Continuously stream up to 60 frames of data per second directly to your computer to monitor minute temperature differences, and analyze videos frame-by-frame remotely from SmartView® desktop software. Enhance your viewing experience with optional add-on lenses to target different applications (analyzing from a distance, or getting the close-up details).

Don’t just see the heat. Stream, measure and analyze it too.

With plug-ins to MATLAB® and LabVIEW®, the RSE Infrared Cameras are ideal for testing and development. Looking for a more robust software to monitor and archive process manufacturing data 24/7? We recommend the ThermoView® series by Fluke Process Instruments. See a quick comparison.

        Visit Demo Video

infrared camera price

Key features:

- MATLAB® and LabVIEW® software compatibility allows users to  integrate infrared data, images    and videos to support R&D  analysis

- 640 x 480 resolution

- See the details you need with optional smart lenses: 2x and    4x telephoto, wide angle and macro         lenses

- Optimize images, generate customizable reports and export   images to the format of your choice         with SmartView® desktop   software

- Wirelessly connect your camera to the Fluke Connect® system   to easily share and edit images